Saiex Flameproof Equipments Private Limited
Anand, Gujarat
GST No. 24AAYCS8794A1ZP
TrustSEAL Verified
Call 08047631663 77% Response Rate
SEND EMAIL
Product Details:
| Gas Group | IIC |
| Zone Classification | Zone 1 & Zone 2 |
| Operating Voltage | 24V DC/240V AC/415V AC |
| Certification | ATEX, BIS, PESO |
| Sound Level | 90 - 100 db |
| With Flasher | Hooter With Flasher |
| Enclosure Material | Cast Aluminium |
| Ingress Protection | IP66 |
| Cable Entry | 2 x M20 |
| Temperature Class | T6 |
“SAIEX” Flameproof Hooter with Flasher is a combined audible and visual alarm device enclosed in a flameproof (explosion-proof) housing, designed for use in hazardous areas where flammable gases or vapors may be present.
It provides simultaneous sound (hooter) and light (flasher) signals to warn personnel of emergency, abnormal, or unsafe conditions, while ensuring that any internal spark, heat, or explosion is contained within the enclosure and cannot ignite the surrounding explosive atmosphere.
Various Names
Flameproof Hooter with Flasher is also known as Explosion Proof Hooter with Flasher, Ex d Hooter with Flasher, Hazardous Area Audio Visual Alarm, Flameproof Audio Visual Alarm, Explosion Proof Sounder Beacon, ATEX Hooter Beacon, IECEx Audio Visual Alarm, Industrial Flameproof Hooter with Beacon, EEx d Hooter with Flasher.
Gas Group: IIC, Temperature class: T6, Zone: 1/2 & 21/22
IP Protection: IP 66 as per IS/IEC 60529: 2001
Colour: Epoxy Grey 631 (Other option Pebble Grey 7032, 7035 & Pure White 9010)
Gasket: Endless Molded Neoprene (‘O’ Ring)
MOC: Cast Aluminium Alloy LM-6
Earthing: 1 nos inside & 2 nos outside
Electrical Maximum Rating: 32 Amp, 24V DC/240V AC/415V AC
Marking Plate: (Ex db IIC T6 Gb) (Ex tb IIIC T85o C Db)
Hooter: 24V DC & 230V AC
Flasher: 24V DC & 230V AC
Cable Entry Size: M20
Cable Entry Nos: 1 or 2 nos
Accessories: With or Without Cable Gland
For Regular and Clean Room Fittings
CERTIFICATES: BIS | CIMFR | PESO
STANDARDS: IS/lEC 60079-0:2017 | IS/lEC 60079-1:2014| IS/lEC 60019-31:2013
How It Works
The unit consists of a sound-producing mechanism (hooter or sounder) and a high-intensity flasher or beacon, both housed in flameproof enclosures or in a single certified flameproof assembly.
When electrical power is applied, the hooter generates a loud audible signal while the flasher emits intermittent or continuous light. During operation, any electrical arcing, switching spark, or overheating remains confined inside the flameproof enclosure. If ignition occurs internally, the enclosure withstands the explosion, and the flame paths cool escaping gases so that the external hazardous atmosphere is not ignited.
Where Flameproof Hooter with Flasher Are Used
Flameproof hooter with flasher units are used in hazardous locations where both audible and visual warning is required for safety.
Typical IndustriesOil and Gas plants, Petrochemical industries, Chemical processing units, Refineries, Fertilizer plants, Power plants, Paint and solvent handling areas, Mining, Pharmaceutical plants with solvent handling zones.
Typical Applications
Emergency and evacuation alarms, Gas leak detection systems, Fire and explosion warning systems, Process fault and shutdown alerts, Equipment trip indication, Safety signaling in high-noise hazardous areas.
Product Details:
| Gas Group | IIC |
| Zone Classification | Zone 1 & Zone 2 |
| Operating Voltage | 32 Amp, 24V DC/240V AC/415V AC |
| Certification | PESO, ATEX, CIMFR, BIS |
| Sound Level | 100 dB |
| With Flasher | Hooter Only |
| Enclosure Material | Cast Aluminium |
| Ingress Protection | IP66 |
| Temperature Class | T6 |
“SAIEX” Flameproof Hooter is an audible alarm device enclosed in a flameproof (explosion-proof) housing, designed to operate safely in hazardous areas where flammable gases or vapors may be present.
It produces a loud warning sound to alert personnel during emergency, fault, or abnormal conditions, while ensuring that any internal spark, heat, or explosion generated by the device does not ignite the surrounding explosive atmosphere.
“Flameproof” means the enclosure can withstand and contain an internal explosion and prevent flame propagation to the outside environment.
Various NamesFlameproof hooter is also known as Explosion Proof Hooter, Ex d Hooter, Hazardous Area Hooter, Flameproof Audible Alarm, Explosion Proof Sounder, ATEX Hooter, IECEx Hooter, Industrial Flameproof Alarm, EEx d Hooter.
Gas Group: IIC, Temperature class: T6, Zone: 1/2 & 21/22
IP Protection: IP 66 as per IS/IEC 60529: 2001
Colour: Epoxy Grey 631 (Other option Pebble Grey 7032, 7035 & Pure White 9010)
Gasket: Endless Molded Neoprene (‘O’ Ring)
MOC: Cast Aluminium Alloy LM-6
Earthing: 1 nos inside & 2 nos outside
Electrical Maximum Rating: 32 Amp, 24V DC/240V AC/415V AC
Marking Plate: (Ex db IIC T6 Gb) (Ex tb IIIC T85o C Db)
Hooter: 24V DC & 230V AC
Cable Entry Size: M20
Cable Entry Nos: 1 or 2 nos
Accessories: With or Without Cable Gland
For Regular and Clean Room Fittings
CERTIFICATES: BIS | CIMFR | PESO
STANDARDS: IS/lEC 60079-0:2017 | IS/lEC 60079-1:2014| IS/lEC 60019-31:2013
How It WorksA flameproof hooter contains an electromagnetic, electronic, or motor-driven sound-producing unit housed inside a robust flameproof enclosure.
When electrical power is applied, the internal mechanism generates sound vibrations that are amplified through a horn or sound outlet. During operation, any electrical switching, arcing, or overheating remains confined within the enclosure. If ignition occurs internally, the flameproof housing contains the explosion, and the hot gases are cooled as they pass through the flame paths, ensuring that the external hazardous atmosphere is not ignited.
Where Flameproof Hooters Are UsedFlameproof hooters are used in hazardous locations where audible warning or emergency signaling is required.
Typical IndustriesOil and Gas plants, Petrochemical industries, Chemical processing units, Refineries, Fertilizer plants, Power plants, Paint and solvent handling areas, Mining, Pharmaceutical plants with solvent zones.
Typical ApplicationsEmergency alarms, Gas leak warning systems, Fire alarms, Equipment fault indication, Process shutdown alerts, Evacuation warnings, Safety signaling in hazardous zones.
Product Details:
| Gas Group | IIC |
| Zone Classification | Zone 1 & Zone 2 |
| Operating Voltage | 24V DC/240V AC/415V AC |
| Certification | PESO, BIS, CIMFR, ATEX |
| Sound Level | 90 db to 100 db |
| With Flasher | Hooter With Indicating Lamp |
| Enclosure Material | Cast Aluminium |
| Cable Entry | 2 x M20 |
| Temperature Class | T6 |
“SAIEX” Flameproof Hooter with Indicating Lamp is a combined audible alarm and visual indication device enclosed in a flameproof (explosion-proof) housing, designed for operation in hazardous areas where flammable gases or vapors may be present.
It provides an audible warning (hooter) along with a steady or status-indicating light, allowing personnel to both hear and visually identify abnormal or emergency conditions, while ensuring that any internal spark, heat, or explosion is contained within the enclosure and does not ignite the surrounding explosive atmosphere.
Various NamesFlameproof Hooter with Indicating Lamp is also known as Explosion Proof Hooter with Indicating Lamp, Ex d Hooter with Lamp, Hazardous Area Hooter with Indicator, Flameproof Audible Alarm with Pilot Lamp, Explosion Proof Alarm with Indication Lamp, ATEX Hooter with Indicator Lamp, IECEx Audible Visual Indicator, Industrial Flameproof Hooter Indicator, EEx d Hooter with Indicating Lamp.
Gas Group: IIC, Temperature class: T6, Zone: 1/2 & 21/22
IP Protection: IP 66 as per IS/IEC 60529: 2001
Colour: Epoxy Grey 631 (Other option Pebble Grey 7032, 7035 & Pure White 9010)
Gasket: Endless Molded Neoprene (‘O’ Ring)
MOC: Cast Aluminium Alloy LM-6
Earthing: 1 nos inside & 2 nos outside
Electrical Maximum Rating: 32 Amp, 24V DC/240V AC/415V AC
Marking Plate: (Ex db IIC T6 Gb) (Ex tb IIIC T85o C Db)
Hooter: 24V DC & 230V AC
Indicating Lamp: 24V DC & 230V AC
Cable Entry Size: M20
Cable Entry Nos: 1 or 2 nos
Accessories: With or Without Cable Gland
For Regular and Clean Room Fittings
CERTIFICATES: BIS | CIMFR | PESO
STANDARDS: IS/lEC 60079-0:2017 | IS/lEC 60079-1:2014| IS/lEC 60019-31:2013
How It Works
The unit consists of a sound-producing hooter mechanism and an indicating lamp or pilot light, both mounted inside a flameproof enclosure or in separately certified flameproof sections.
When electrical power is applied, the hooter generates an audible alarm and the indicating lamp illuminates to show the status or type of condition. The lamp may remain steady, flash through an external circuit, or indicate different conditions using color coding. Any electrical switching, arcing, or overheating remains confined inside the flameproof enclosure. In the event of internal ignition, the enclosure withstands the explosion and flame paths cool escaping gases, preventing ignition of the external hazardous atmosphere.
Where Flameproof Hooter with Indicating Lamp Are Used
These units are used in hazardous environments where audible alert and visual status indication are both required.
Typical IndustriesOil and Gas installations, Petrochemical plants, Chemical processing units, Refineries, Fertilizer plants, Power generation stations, Paint and solvent handling areas, Mining operations, Pharmaceutical plants with solvent zones.
Typical Applications
Process alarm annunciation, Equipment fault indication, Machine trip alarms, Emergency warning systems, Control panel status indication, Safety signaling in hazardous locations with moderate noise levels.